Archive for the “four-colour hat” Category
So, this mistake where I swapped a brown stitch with a blue stitch had to be fixed. I couldn’t just leave it there, not if I ever wanted to be pleased with the finished project.
I placed a removable marker around the stitch below the offender and knit to just before that column of stitches. (I’ll note that I should have put the marker into the stitch, rather than around it. I learned from this small mistake and got it right in the second column.)
…and then I dropped the next stitch off my needle and helped it to ladder down. The marker is now where it should have been: holding the stitch just below the one I need to fix and keeping the column of stitches from dropping even farther.
It was surprisingly easy to re-catch the stitches and pick them back up to the needle. Here the first column has been fixed, and I’ve moved the marker to the stitch below the one that needs fixing in the second column.
When it comes to picking up the stitches in a ladder, I’ve found that a small DPN is easier for me to use than crochet hooks. This is a US 1/2.25mm needle that I borrowed from the nearest sock-in-progress. It’s a good deal smaller than the US 4/3.5mm needles on which I’m knitting, which is beneficial if the stitches are tight.
I slipped the DPN through the lowest stitch, then picked up the strand coming from the neighbouring stitch of the appropriate colour. It’s easy to find with a little bit of tugging on the yarn. Then I can either duck the tip of the DPN with the picked-up stitch through the lower stitch, or use my fingernails to lift the lower stitch over the new one. Either way, it’s important to be careful that neither stitch is twisted and that all the yarn’s strands have been captured.
Here’s the fix! You can’t even tell that it was ever wrong.
I was just as concerned about the inside looking good as I was about the outside! Whether it was dumb luck or skills I didn’t even know I had, the inside of the hat looks exactly as it should. Once it’s been washed and blocked, it will be next to impossible to find the fixed stitches.
Q: How long did it take to fix?
A: Not very long. Less time than I spent agonizing over it, anyway. The timestamps on the pictures say it was 24 minutes, but I also spent eight of those minutes on the phone and I also paused to take pictures of the process. So maybe, maybe, it was fifteen minutes at most.
Q: Was it difficult?
A: Way easier than I thought it would be! The colours have so much contrast that it wasn’t challenging to see which strand I needed to pick up. I did split one stitch on the way up the second ladder, but I went back and fixed that too.
Q: Will you spend so much time waffling over whether to fix the mistake the next time this happens? Because you know there will eventually be a next time.
A: Of course I will.
Q: Even though you really know, deep down, that you can’t leave a mistake like that and you’re going to fix it?
No Comments »
It was bound to happen, I suppose. I only wish I’d noticed it sooner. But there it is. A brown stitch where there should be a blue one, and then a blue stitch where there should be a brown one.
I posted to the Ravelry thread for the “Colour Your Winter” challenge to which this hat belongs, and everyone either said that it would be fine to duplicate stitch over the mistake, or that it would be fine to just leave the mistake and no one would notice.
But… I would notice. I’d never be able to not notice. I told the helpful Ravelers that I’d sleep on it and decide what to do, but I already know that I’m going to drop down the eight rounds and fix it. On the plus side, the floats in the back will maintain an appropriate tension since the two stitches will be swapping places!
If I can get good pictures of the fixing process, I’ll share them. Otherwise I’ll just fix it and move on – the hat is very close to completion! There are only a few more rounds to go before I start decreasing for the crown. On a design note, I don’t think I like the way I’ve charted out the top, so I’m going to work out some changes and see if they look as good in yarn as they do in my head. Stay tuned…
No Comments »
Yesterday I hurriedly left the office because it was starting to snow, and while the forecast was only for a little accumulation that can really cause rush-hour troubles here in northern Virginia. (You’d think we’d learn, but no.) Any excuse to hurry home and knit is a good one, right? The snow turned out to be nothing much, but I decided that a good soup was in order for dinner anyway… partially because hearty soup is so pleasant on a cold night, but mostly because soup is practically effortless and leaves more time for knitting!
So I chopped up some veggies and meat, tossed it all into the pot, set it to simmer, and settled in for the evening. I’m so pleased about how this hat is coming out that I fell into that “just one more round!” mentality and stayed up past my bedtime. But look how far I got! I measured it up against an existing hat that fits perfectly, and it looks as if the new one is also going to be just right for my head after it’s washed and blocked. The overall height may need to be adjusted, so I’ll put in a lifeline before I start the next motif.
I’m hoping to have it done soon, and then I’ll refine the chart if necessary and knit another hat in the larger size to test that out, and then I can work on typing up and laying out the actual pattern, and can you tell I’m just a little bit excited about this one?
Anyway, here’s my non-recipe recipe for the soup I made. It was pretty much just thrown together from what was already in the fridge and pantry, but it came out absolutely delicious:
Spicy Split Pea Soup
2 cups dry split peas (I used yellow pigeon peas)
8 cups stock (veggie, chicken, beef, bouillion cubes & water, whatever)
8 ounces spinach, roughly chopped
1 large or 2 small sweet potatoes, cubed
12 ounces ham, cubed (optional)
spices to taste:
black pepper, coarsely ground
red pepper flakes
Jamaican curry powder
vegemite or a couple of anchovies (optional, for flavour)
Easy enough: Put everything in the pot. (If you put the liquid in last, there will be less splashing.) Bring to a boil, then lower to a simmer. Cook uncovered for about two hours, stirring occasionally. Soup will continue to thicken after it cools, and may need additional liquid when reheated.
No Comments »
On April 4, this blog will be TEN YEARS OLD. Ten! Can you believe it? As my grandma used to say, “Who’d’a thunk it?” (And, as I’ve heard elsewhere, “how much could there possibly be to write about knitting?!” Quite a bit, as it turns out.) I’d like to release a new pattern to celebrate this significant “blogiversary,” but obviously that means starting now so that it has a chance of being ready for release in a few months.
I knew I wanted the hat to be stranded colourwork using four colours of yarn, which is outside the realm of my usual knitting – but a special anniversary calls for a special design! So I opened up Excel and started slapping colours into cells. Then there was a lot of rearranging, cutting-and-pasting, scowling, adjusting, centering, shifting, and re-adjusting. Eventually I had something I liked, so I retrieved the yarn I wanted to use (Jo Sharp Classic DK Wool) and some US size 4/3.5mm needles, and started knitting a swatch.
I knit several inches of stockinette to get a feel for the yarn, and then decided to swatch one of the motifs I’d charted. Unwisely, I failed to record the colourways and dye lots when I bought the yarn a few years ago, but the colours are a rich brown, cherry red, pale blue, and creamy white. It doesn’t quite matter, as I’m writing the pattern in two different sizes that will work with four different gauge tensions, so knitters will be able to pick the yarn they like best. This is the colour combination I like for myself, but I’ll offer a few other combination ideas in the final pattern.
Yep, I think that’s going to work just fine. The back side of the swatch is nifty-looking, too.
Once I’d measured and taken pictures, I unraveled the yarn and wound each colour back onto its respective ball. The swatch is pretty, but ultimately useless – and I might need that yarn before I’m done with the hat!
The hardest part of designing a pattern isn’t the charting, the writing, or the test-knitting… it’s coming up with a good name. “Four-Colour Hat” is all right for a working title, I guess, but it won’t do for the long term. Suggestions are welcome, of course! (Just not “Blogiversary Hat”. That would be silly.)
No Comments »
Over on Ravelry, the Remrants group is hosting a Colour Your Winter Craft-A-Long challenge – to finish a colourwork pattern before 31 March. Works-in-progress are acceptable entries, but I decided to start my year off with the challenge of designing a new hat in four shades of DK-weight yarn: brown, tan, red, and light blue.
My first attempt at two-colour ribbing didn’t have a nice edge, so I started over. My second attempt curled up far too much, so I started over. For the third attempt, I changed tactics and tried a two-colour brioche rib, a technique that’s completely new to me. Unfortunately, the instructions I found had left out a bit of important information, which is that even on knit rows, stitches are slipped with the yarn in front. So I started over. Again.
The fourth try was the charm, and I have some two-colour brioche on the needles now. It’s reversible, so my plan is to knit enough to have a fold-up brim, which allows for the wearer to adjust the length of the hat…
…but my gauge for the width was totally off, and I think the finished hat might end up being two or three inches too large for my small head. That’s okay, because I’d wanted to write the pattern for two sizes, so I guess this one is going to be the larger. I’m also planning to design and knit a matching set of fingerless gloves and/or mittens!
2 Comments »